97
E
5 Functions of the basic screen
.1 Standard Mode
the selection of direct measurement or measurement in dynamic
On each return in min/max mode the memories of minimum and
im
ized with the value measured by the probe. The minimum and
im
his point. The icon becomes green when the min/max mode is
ries of minimum and maximum to the value measured
um or maximum is done from this point (this
using the external contact). This function is active only in
ynamic mode.
Allows to Enable/Disable all the functions of the Bar tasks. No more
Icons with function. It is also possible to disable the functions of the
oftware and use them with the external contacts only.
Send the values to Excel/NotePad/file (see chapter 4.1.5).
It also allows to start /stop the automatic data acquisition if it has been
elected (see chapter 4.1.1 «Sub-menu RS232 Setup»).
he icon becomes green if the automatic data acquisition is functioning.
Allows the interruption of min/max measurements. The min/max values will
not be saved as long as the mode «Pause» is active. This function is only
displayed when the min/max mode is active.
5
Allows
.
mode
max
um are re-initial
x
t
ma
um starts from
activated.
Reinitializes memo
using a probe. A new minim
fun
n is available also
ctio
d
s
s
T
Version of the connected unit
Indicator of tolerances (global)
Menu Name of Part
Bargraph display
Activates/deactivates the
Enables/ Disables
Activation of General Setup
function keys
the connection
* Right - button of the mouse
Value of measurement
Enables / Disables
Dynamic mode
Initializes
the dynamic mode
Activates
the Preset value
Send the values to
E
Activates
Setup
C
R
hange
esolution
hange the unit
C
mm or inch
xcel/Notepad file
Indicator
measure n°
Indicator
Tol.Low
Indicator
Tol.Upper
Indicator
Measuring mode
Indicator
Preset
Indicator
+/-
Indicator of Channel n°
Individual activation of each channel
