103
E
6 Communication protocol
The unit can work without the software D200S. The D200S unit can receive retro-
commands and thus modify the para
serial software of communication (e.g. Winwedge...) to fulfilled simple functions or to
create his own software.
The D200S unit transmits by using the following parameters:
Baud rate
19’200
(remote commands)
meters of its configuration. The user can use a
Stop bit
2
D ta
8
a bit
P
(No parity)
arity
6.1 Example of communication with software Winwedge 32
Start the software Winwedge 32
Select the communication
:
None
Data Bits :
Flow Control :
None
(Non)
Then click OK
ut”
?
»
eturn
value of the 8 channels
, the values
ls are
Select the port used
Example :
COM4
parameters.
Baud Rate :
19200
Parity
Eight (8)
Stops :
2
Select "Analyze"
Enter into the window “Outp
the remote command «
followed by «
CR
» carriage r
ASCII (13)
to display the
of the D200S unit
Click on SEND icon.
In the window Input Data
of the connected channe
displayed.
