E
4.1.2
Sub-menu Channel Setup
Configuration of the channels
following parameters:
Each channel can be configured with the
Setting :
Upper Tol. = Upper tolerance
Lower Tol.. =Lower tolerance
Nominal Value = Nominal value
g direction and mode
Preset Value = Pre-selected value
Measurin
Increase (+) = positive (+)
Decrease (-) = negative (-)
Measuring type: External or Internal
Measuring mode :
Direct:
direct display of the value
Max:
displays the maximum value
Min:
displays the minimum value
Delta:
displays the difference (maximum - minimum)
um) of all channels,
preceding the channel in
e. g.: the "Flatness" mo
is connected to th
maximum-minimu
displayed on channel 6. The utmost maximum and the smallest
minimum of chan
corresponds to a general "delta" of the channels 1 to 5.
Comment: the "Flatnes
the time.
oncentricity: displays the difference (
omment: after configuration of the m
ssary to press the
"Min/Max" key to activate the function. If not, all channels will stay in
direct mode.
hannel disable :
Mean:
displays the mean value (m minimum)/2
Flatness:
displays the difference (maximum - minim
dicating the "Flatness" mode.
de has been selected on channel 6 (no probe
is channel). In this case, the difference of
m of channels 1 to 5 will be calculated and
nels 1 to 5 are used for calculation. This
s" mode must only be used on 1 channel at
maximum - minimum), identical to a "delta".
easuring mode, it is nece
C
C
C
he channel selected can be hidden, th value is not visible anymore but the
easurement is always active.
alibration :
T
e
m
C
ach channel can be calibrated individ
r 7.
ef 0 : Reference value 0
ef 1 : Reference value 1
ath. function
E
ually. See chapte
R
R
M
actor A : multiplication factor of the ch nnel.
anal A : Selected channel(1, 2 ,…)
measurement can be made up of se
ade
y an operator (+,-,*,/).
alibration Dates
F
a
C
A
b
veral channels, the combination can be m
C
he calibration date can be introduced
he next calibration date can be introd
eset :
T
.
uced.
T
R
rase all the data of the selected chan
E
nel.
88