The home technology brand for the entire house. More information at
www.sygonix.com
GB
Operating instructions
WLAN/LAN colour camera
• The camera must not be exposed to extreme temperatures, direct sunlight,
strong vibrations or heavy mechanical stress.
• Make sure that the connection cable is not pinched or damaged by sharp
edges.
• Do not leave packing materials unattended. They may become dangerous
playthings for children.
• Handle the product with care, it can be damaged by impacts, blows, or ac-
cidental drops, even from a low height.
• If the camera is used with other devices (e.g. a monitor), the operating in-
structions and safety notices for these devices must be followed as well.
• A safe operation can no longer be assumed, if:
- the device shows visible signs of damage,
- the device no longer works
- the device was stored for a long period of time in unfavourable conditions
- it was exposed to heavy loads during transport
• In commercial institutions, the accident prevention regulations of the Em-
ployer’s Liability Insurance Company for Electrical Systems and Operating
Materials are to be observed.
• Disconnect the power supply from the camera if it is not to be used for a
while (e.g. for storage).
• If you have any questions, which are not answered in this manual,
please contact our technical service or another specialist.
Getting started, Connection via RJ45
Test the camera before installing it in the desired place.
To make all the settings, the camera should always be connected
fi
rst to the
computer via RJ45. Only when the camera works properly can WLAN operation
be set up.
• Mount the WLAN antenna to the respective connection at the back of the camera.
• Connect the camera's RJ45 connector to a 1:1 connected network cable and its net-
work, e.g. a network switch.
• Connect the low-voltage socket of the camera to the corresponding round plug on
the enclosed power adapter. Insert the plug-in power adapter into a mains socket,
the "power"-LED on the plug-in power adaptor lights up.
There are two more LEDs in the RJ45 socket; one LED indicates the link status (net-
work cable/ connection ok), the other LED indicates data transmission via the LAN
cable (LED is
fl
ashing).
If the camera is ready for operation the green LED "NETWORK" above the power LED
is
fl
ashing.
• Insert the provided CD into the appropriate drive on your computer and start the
installation programme. At the time of writing this operating manual it was located
in the folder "IP cam tools...." (programme name "IPCamSetup.exe").
Follow all the software instructions. It might be necessary to restart Windows after-
wards.
Be aware that the names and descriptions of the installation procedure, as de-
scribed here, may be changed in newer versions of the software. In this case please
observe the accompanying English language operating manual on the CD (pdf).
• Start the software ("IP Camera Tool"). It will search for available cameras in the net-
work. If the camera is shown with its respective IP address, double-click on it.
Please note: In your network a DHCP server must be active (e.g. the DHCP
server of a router). The PC must be con
fi
gured so that it assigns an IP address
automatically. The camera is also assigned an IP address by the DHCP server.
• The main window of the software appears ("Real-time IP Camera Monitoring Sys-
tem"). Enter "admin" into the "User"
fi
eld (lower case characters without quotation
marks), leave the "Password"
fi
eld empty.
• Then click on the button "Login" - whatever Internet browser is being used.
Use in accordance with manufacturer's instructions
The product is intended for surveillance by means of the integrated camera. It can
either be operated wired via a 10/100MBit network (RJ45 connection) or wireless via
WLAN (802.11b/g, 54MBit).
The product must not get damp or wet, it is intended only for use in dry, indoor loca-
tions.
The power for the camera is supplied via the power transformer included in the de-
livery.
Please bear in mind that it is prohibited by law to watch strangers with a camera with-
out their knowledge and consent. Observe the rules and regulations of the country
where you are using the camera.
Any other use than that described above may damage the product. Moreover, this
may give rise to hazards such as short-circuiting,
fi
re, electric shock, etc. No part of the
product may be modi
fi
ed or converted!
The safety instructions and technical data must be followed without fail!
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owner. All
rights reserved.
Package Contents
• Camera
• WLAN Antenna
• Network cable
• Bracket with mounting material
• Power adapter
• CD with comprehensive operating manual in English (pdf)
• Quick guide
Explanation of the Symbols
The lightning symbol indicates a health hazard, e.g. electric shock.
This symbol indicates speci
fi
c risks associated with handling, function and
use.
The "arrow" symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any
consequential damage!
Nor do we assume liability for damage to property or personal injury
caused by improper use or failure to observe the safety instructions. In
such cases the warranty will be null and void.
• The unauthorised conversion and/or modi
fi
cation of the product is inad-
missible because of safety and approval reasons (CE). Never dismantle the
product.
• The product is not a toy and must be kept out of the reach of children. It
should be operated out of the reach of children.
• The use of the surveillance camera system does not replace the personal
supervision of children, or people who require special assistance, but only
serves as a support to this supervision.
• The design of the wall plug transformers complies with protection class II.
Only connect the power adapter to a standard mains socket connected to
the public supply.
• The product should only be used in dry indoor areas, it must not become
damp or wet! There is a risk of a lethal electric shock!
