User Manual PILOT X
August 2021
Page 31 of 36
4.4.1 Connect to WiFi Network
On this page you can configure the connection data to connect to an
existing WiFi network.
Choose available SSID
Click here to see all available WiFi networks.
(Sometimes you need to refresh the page)
Choose the network you want to connect
to.
Enter SSID
If you have selected a network you can also
see the name here now. You can also type
in the name manually.
Enter key
Type in the network key for the selected
WiFi network.
Check
WiFi LED
if you want LED 3 to show
the WiFi traffic.
Then click on
“Save“
and the settings will be
stored.
PILOT X will confirm this by saying
“
Stored
“
and if the connection could be established
with “
Wifi connected
“.
After successfully connecting to the selected WiFi you are logged out from PILOT X and hotspot is
disabled.
To reconnect to PILOT X please follow:
-
Connect your computer to the same WiFi as PILOT X is now connected.
-
Open your browser.
-
Go to the address line and type in the IP address of PILOT X or you can try
can get the IP address with the status information by pressing key 2 > 3s (see page 5).
-
Now you can login again and continue. (see page 7).
