Configuration examples
3-16
Example SwyxConnect
1724
4.
Use the supplied power supply unit to provide the device with
power.
For the model SwyxConnect 1723, you can optionally connect analog
terminal equipment such as fax machines or DECT telephones to the
analog interfaces.
3.2.3.2 Other requirements
Apart from the hardware installation, the following preparations are
necessary for configuring the Swyx VoIP Router:
1.
Set up Internet access on the Swyx VoIP Router.
2.
Set up a dialing plan with a unique internal telephone number for
each piece of terminal equipment to be connected. In general,
the numbers used are predetermined by the PBX, which often
only allows certain number ranges.
3.
Order a trunk account from a SIP provider (including a
switchboard number and a range of extension numbers) and
have the assess information at hand.
3.2.3.3 Configuring the Swyx VoIP Router
When configuring the SwyxConnect, the following steps must be
carried out:
• Set up the line to the SIP provider
• Activate the internal ISDN busses for VoIP use
• Create an ISDN user with placeholders
• Adapt the call routing table
ISDN4 ( )
ETH2
USB Config (COM)
ETH1
ISDN1 ( )
⌧
ISDN3 ( ) ISDN2 (
)
⌧
ADSL 2+
Splitter
On
Off
1 2 3 4 5 6 7 8 9 10
4xS
0
ISDN PBX
Summary of Contents for SwyxConnect 1722
Page 112: ...I 5 ...