Configuration examples
3-10
1.
Set up Internet access on the Swyx VoIP Router.
2.
Set up a dialing plan with a unique internal telephone number for
each piece of terminal equipment to be connected. In general,
the numbers used are predetermined by the PBX, which often
only allows certain number ranges.
3.
Order an account from a SIP provider, and have the assess
information at hand.
3.2.2.3 Configuring the Swyx VoIP Router
When configuring the SwyxConnect, the following steps must be
carried out:
• Set up the line to the SIP provider
• Activate the ISDN line and assign the internal telephone number
in the Swyx VoIP Router.
• Create analog users
• Adapt the call routing table
Detailed instructions on configuring the SwyxConnect:
1.
Under LANconfig, start the setup wizard for configuring the VoIP
Call Manager. Enable the options 'SIP provider', 'ISDN phone
system' and 'ISDN users'.
2.
Enter a unique domain for the local VoIP domain which identifies
the local VoIP range for the site (e.g. 'mycompany.internal'.)
3.
In the 'Single account' mode, configure the line to the SIP
provider (e.g. named 'SIPPROVIDER') with the following values:
Summary of Contents for SwyxConnect 1722
Page 112: ...I 5 ...
