300143 RevA
Page 8 of 9
Controller Mounting:
To mount the controller with the supplied Velcro, remove the
backing on one piece of the round material and adhere to a flat,
clear surface. Take backing off other piece and adhere back of
the controller to it.
To mount the controller using the swivel mount, first mount the
swivel unit to the dashboard. To use the suction cup, you must
put it on a smooth-finish flat surface larger than the area of the
suction cup. Once in position, slide the lever along the base of
the swivel unit to engage the suction cup. Or you can use the
supplied screws. Note, the suction cup will not work after drill-
ing screws through the swivel base.
Push the controller onto swivel slide (#1 on diagram) and press
the controller down (#2 on diagram) along the slide until it
engages the slot in the controller. Turn the dial on the swivel
head to tighten it against the back of the controller.
Finally, loosen the thumbscrew on the swivel neck to adjust the
angle of the controller. Hold the controller in the desired posi-
tion while tightening the thumbscrew on the swivel neck.
Description
Part No.
Domes
REPLACEMENT END DOMES
87020
REPLACEMENT MID DOMES
87021
LED Modules
REPLACEMENT LED WORK / ALLEY / TAKEDOWN MODULE, PAIR
79300
REPLACEMENT LED STOP / TAIL / TURN MODULE, KIT
79301
REPLACEMENT LED WARNING MODULE, AMBER
79303
REPLACEMENT LED WARNING MODULE, BLUE
79304
REPLACEMENT LED WARNING MODULE, WHITE
79305
REPLACEMENT LED WARNING MODULE, GREEN
79306
REPLACEMENT LED WARNING MODULE, RED
79307
Controller
IN-CAB CONTROLLER
77520
REPLACEMENT CONTROL CABLE 15’
77301
Auxiliary Driver
4 LED MODULE DRIVER AUXILIARY
79309
Mounting
REPLACEMENT FOOT, PAIR
98063
Replacement Parts/Accessories:
Push the controller onto swivel slide and press
the control pad down onto the slide until it
engages the slot in the control pad.
1
2
