SWR Envea M-Sens 2, Operating Instructions Manual

Page: 24 / 27

24
7. System
Setting of the ModBus interface parameters
when connecting to the system bus.
With and you make a choice
according to the display. With you quit
the menu point without any change and with
the input is accepted and you arrive 1 menu point lower to make your settings.
7.1 Baud rate
Choice of baud rate between
4800 / 9600 / 19200 / 38400 Bd
With and you make a choice
according to the display. With you quit
the menu point without any change and with
the input is accepted and you quit the menu level.
7.2 ModBus address
ModBus address in RTU-Mode (slave).
Address range 1 ... 255.
With you set the value to 0. With the
numbers you input the beginning value and
with the input is accepted and you quit
the menu level.
7.3 Contrast
Display contrast for a better legibility.
Adapt the contrast to desired value with the
keys and quickly and with the keys
and slowly. With the input is
accepted and you quit the menu level, with
you quit the menu point without any change.
7.4 Language
Choose of language between: D / F / E
With and you make a choice
according to the display. With you quit
the menu point without any change and with
the input is accepted and you quit the menu level.
7.5 Backlight
Setting of durable lightning or the
luminescence (in min).
Zero corresponds to permanent lighting.
With you set the value to 0 (equals to
durable lightning) by means of the numbers
and with the input is accepted and the menu level is quitted.
System
£
Baud rate
¤
9600
C
8
8
C
<< >>
< >
C
8
£ ¤
8
C
£ ¤
System
7 8
9
Address
4 5
6
1
1 2 3
C
0
8
8
C
System
£
Language
¤
D
C
8
8
C
£ ¤
7. System
£
7.1 Baud rate 960 9600
¤
7.2 Address 1
7.3 Contrast
C
7.4 Language D
8
q
System contrast
C
<<
< > >>
8
C
8
System
7 8 9
Backlight
4 5
6
0
min
1 2 3
C
0
8