19
1.2.4 Alarm hysteresis
Choose the value for clearing the alarm.
Range between 0.1 ... 99.9 % in the defined
measurement range.
With you set the value to 0.0. With the
numbers you input the beginning value and
with the input is accepted and you quit the menu level.
1.2.5 Operation modus
Choice of switching contact:
AST - Open current
RST - Closed current
With and you make a choice
according to the display. With you quit
the menu point without any change and with the input is accepted and you
arrive 1 menu point lower to make your settings.
1.3 Alarm 2
According to Alarm 1
1.4 Calibration
With and you make a choice
according to the display. With you quit
the menu point without any change and
with the input is accepted and you arrive
1 menu point lower to make your settings.
1.4.1 Calibration filter
Damping filter in order to slow down
disturbed signals during the calibration
(no effect on output and display);
Range between 0.1 ... 999.9 s
With you set the value to 0.0. With the
numbers you input the beginning value and with the input is accepted and
you quit the menu level.
1.4.2 Number of
calibration points
Enter the necessary number of base points
(between 2 ... 5).
With you set the value to 0.0. With the
numbers you input the beginning value and
with the input is accepted and you quit the menu level.
C
8
Alarm 1
£
Operation modus
¤
AST
C
8
C
8
£
¤
1.4 Calibration
£
1.4.1 Filter 0.1 s
¤
1.4.2 Base point 2
1.4.3 Factor 1 1.00
C
1.4.4 Factor 2 0.00
8
C
8
£
¤
8
C
Calibration
7 8 9
Filter
4 5 6
0.1
s
1 2 3
C
0
8
8
C
Calibration
7 8 9
Base points
4 5 6
2
1 2 3
C
0
8
Alarm 1
7 8 9
Hysteresis
4 5 6
1.0
%
1 2 3
C
0
8
