107
12 In Case of Problems
Service Hotline
Should problems arise with the telephone, please refer to the following information first. In the
case of technical problems, you can contact our hotline service, Tel. 0900 00 1675 within Swit-
zerland (Swisscom fees at time of going to print: CHF 2.60/min). In the case of claims under
the terms of guarantee, please contact your sales outlet. There is a 2 year period of guarantee.
Problems and solutions
Problems
Solutions
No connection to base station pos-
sible
−
Check that the handset has been registered on the
base station with the correct PIN code;
Page 18.
No telephone calls possible
−
The telephone is not connected properly or is defec-
tive. Only use the telephone connection cable supplied.
−
Test whether the telephone connection is in order by
using another telephone.
−
The power adaptor plug is not plugged in or there is a
complete power failure.
−
The rechargeable batteries are empty or defective.
−
The handset is too far from the base station.
−
The wrong dialling mode is set;
Page 13.
Connection is disturbed or cut off
−
The handset is too far from the base station.
−
The base station is in an unsuitable location.
The system no longer responds
−
Reset all the functions to their default settings;
Page 16.
−
Disconnect the power adapter plug briefly from the
power socket.
The batteries are empty within a
short time
−
The batteries are empty or defective.
−
Place the handset in the base station properly. Clean
the contact surfaces on the handset and base station
with a soft, dry cloth.
−
Place the handset in the base station for 12 hours.
The caller number display (CLIP
1
)
does not function
−
The caller number display (CLIP) is a supplementary
service offered by your telephone network provider.
Contact your network provider for further information.
−
The caller has suppressed the transmission of their
phone number.
1
CLIP: C
alling
L
ine
I
dentification
P
resentation = Display the caller’s phone number.
