- Multiple handsets -
159
9.3
Logging on and logging off handsets
9.3.1
Logging on D6020 handsets
1.
Press and hold the page button
on the base station for 6 seconds
until you hear two signal tones. Now log on the new handset to the base
station within 90 seconds.
2. Press
the button on the handset.
3. Select
the
REGISTER
menu with and and confirm with
.
4. Select
the
REG BASE
menu with and and confirm with
.
5.
Now enter the number of the base station (1 - 4) using the number pad. If
the handset is already connected to a base station, the corresponding
numbers will flash.
6.
Confirm your entry with the
button
.
A search will now be carried out for
the base station.
7.
After the base station has been found, you must enter the PIN Code for
the base station (factory setting 0 0 0 0).
8.
Confirm your entry with the
button and after a few seconds you will
hear a signal tone. The handset is now logged on and can be used for
external and internal calls.
9.
An internal number will now be automatically assigned to the handset.
The handset that has already been logged on has the internal number 1.
The second handset to be logged on is given the internal number 2.
These internal numbers are shown in the right of the display next to the
name.
9.3.2
Logging on other DECT-GAP telephones to the base station
In order to log on a DECT-GAP handset, follow the instructions in the other
supplier's operating manual and then press the
button on the base station
for 6 seconds. Use the PIN-Code 0 0 0 0 to log on.
Summary of Contents for D6020
Page 42: ...42...
