- Operation -
134
4.2 Receiving
calls
When a call arrives, the ringing tone sounds on the handset and on the base
station. The handset will ring a little later than the base station due to the radio
transmission. The message
EXT
. will flash in the display. Press the call button
on the handset and the connection will be made. The call indicator on the
base station will flash during the call.
Note:
While the handset is ringing, you can adjust the ringer volume by means
of the and buttons.
To end the call, replace the handset in the base station or press the call button
on the handset.
Notes:
Please refer to Chapter 6 for information on how to show the
caller's number in the display.
When the automatic call accept feature is selected, the call is automatically
accepted as soon as you lift the handset from the base station. You can find out
in Chapter 8.5 how to switch the automatic call accept feature on or off.
4.3 Making
calls
1.
Enter the required telephone number with a maximum of 32 digits using
the number pad. As the display is only capable of showing 12 digits, in
the case of longer phone numbers only the last 12 digits are displayed.
Note:
If you have entered a number incorrectly, you can delete the number by
repeatedly pressing the
button. The number is completely deleted by
pressing the
button for a long time.
2.
Press the call button
and the required connection will be made.
Summary of Contents for D6020
Page 42: ...42...
