- Operation -
135
Note:
You can also get a dialling tone by first pressing the call button
. On
entering the digits of your required phone number, your telephone will dial the
number directly. With this method of making a call, it is not possible to correct
individual digits in the number in the manner described above.
4.4
Dialling stored numbers from the phone book
After you have stored a few phone numbers, you can call these up very quickly
and easily.
1.
Press the phone book button
. The display will now show the first
number stored in alphabetical order.
2.
You can now select all of the stored numbers with the and buttons.
To choose a phone number directly alphabetically, press the appropriate
letter.
3.
Now press the call button
and the telephone number displayed will be
automatically dialled.
4.5 Call
duration
display
The call duration in minutes and seconds is shown in the display during a call.
Fifteen seconds after dialling, the display will switch from showing the number
dialled to showing the duration of the call. The call duration will still be retained in
the display for a few seconds after the call has been ended.
4.6
Switching the handset on and off
You can switch off the handset by pressing and holding the
button. If the
handset is switched off, no battery power will be used. It will not be possible to
receive calls.
Press the
button once to switch the handset on again. The display will
show the message
BASE
1
and the handset will switch on again after a short
time. The handset will switch itself on automatically as soon as you replace it on
the base station.
Summary of Contents for D6020
Page 42: ...42...