- Setting up -
130
3 Setting
up
3.1 Safety
information
NOTE:
Before setting up, it is essential that you read the Safety Information at
the beginning of this operating manual.
3.2
Check contents of pack
The following items are supplied:
one base station
one mains cable
one handset with belt clip
two standard batteries
one telephone connecting cable
one instruction manual
3.3
Connecting the base station
Position the telephone near to your telephone connection socket and to a mains
socket.
1.
Insert the plug of the power supply into the socket on the underside of the
base station and plug the power supply into a properly installed 230 V
mains socket. The plug-in power supply for the base station must always be
connected. For safety reasons, use only the plug-in mains power supply
provided.
2.
Connect the telephone cable supplied to the telephone socket and the
telephone jack on the underside of the base station. Use only the new
telephone cable provided.
3.
Run the two cables through the two cable channels to the rear of the base
station.
3.4
Fitting standard batteries
To fit the standard rechargeable batteries supplied into the
handset, press on the upper edge of the battery
compartment and slide it downwards. Now insert the
batteries taking care to ensure that the polarity is correct.
Close the battery compartment cover.
+
AAA
+
AAA
Summary of Contents for D6020
Page 42: ...42...
