Swissvoice XTRA 3355, User Manual

Page: 31 / 42

31
12.1. Manual call block mode
Manual call block is the easiest option when starting out. When you chose ON in the call block settings, all calling
numbers registered in your blacklist will be blocked. You can add/remove numbers from that list at any time.
How to block an incoming call:
When the phone is ringing and before answering, press . It will terminate the call and offer you the option to
register the number to the blacklist in one click. Then to confirm the registration of this number in the blacklist,
press Ok .
IMPORTANT: if you don’t confirm, the number will not be added to the blacklist and the next call will go through
normally.
NOTE : All the procedures described below (to 12.1.1 to 12.8) can also be performed from the telephone base.
From there, the only difference is that the icon / described below corresponds to the telephone base
key.
12.1.1. Enable MANUAL mode
Block set. Call block
Off
On*
VIP OK
Contacts OK
Menu
In idle mode,
Press
, press or to select Call Block .
Press , press or to select Block Set .
Press , press or to select On (manual mode).
OR
In idle mode, press to access Block Set. directly.
After you enable this option, the call block icon will be displayed on the LCD.
12.2. Add numbers to Blocklist
In idle mode,
1. Press key,
Call Block and its icon is displayed, then press or to select Blocklist ,
press to show Blocklist numbers.
2. Press or to select numbers stored in Blocklist .
3. Press to select Add new , enter number to be blocked, press to save.
NOTE: 1 more ways to add incoming and outgoing call numbers in Block list:
1. From incoming call numbers
Press , to enter Call list, press or to select the stored numbers in Call List .
Press Menu , press or to select the Add to Block .
Press Ok to show selected number, press to save to Block list.
12.3. Edit numbers in Block List
In idle mode,
1. Repeat step 1 and 2 in Section 12.2. to select the stored numbers.
2. Press
, press or to select Edit , start to edit selected number press to save.
12.4. Delete a number in Blocklist
1. Repeat step 1 and 2 in Section 12.2. to select the stored numbers.
2. Press
, press or to select Delete, Confirm? is shown, and then press to confirm.
12.5. Delete all numbers from Blocklist
1. Repeat step 1 and 2 in Section 12.2. to select the stored numbers.
2. Press
, press or to select Delete All to delete at a time, press , Confirm? is shown, and then
press to confirm.