Swissvoice XTRA 3355, User Manual

Page: 24 / 42

24
6.8. Status of phonebook
You can view how many phonebook records are stored out of total 100 records.
Through both Cordless Hanset and Telephone Base:
1. Press
, press .
2. Add new appears then press or to select Status , press Ok .
3. X / 100 Used will display.
7. PHONE SETTINGS
7.1. Set Ringer Melody and Volume
For Telephone base:
1. Press
Menu and or to select BS Settings , then press Ok .
2. And or to select BS Ringer , then press Ok .
3. After selection, press to confirm setting. You hear confirmation tones.
Notes:
Ext. Ring means ring tone (total 12 for handset, 12 for base) will ring when external call.
Int. Ring means ring tone (total 12 for handset) will ring when internal call (between base and handset, or among
2 or more handsets registered to the base).
Ring Vol is for: Off (ringer is off), Volume 1 to Volume 5 .
When the telephone is ringing, you can temporarily set silence for the ringer of the handset by pressing
only without disconnecting the call.
The next call rings normally at the preset volume.
For cordless handset:
1. Press on the handset in idle mode.
2. Press or to select HS Setting , then press .
3. Select Ring Setup by pressing .
4. Press or to select Ext. Ring , Int. Ring or Ring Volume , then press .
5. After selection, press to confirm setting. You hear confirmation tones.
7.2. Set Alert Tone
You can turn on the alert tone in the cordless handset when low battery/out of range is detected and key tone
can be on or off.
1. Press
when idle.
2. Press or to select HS Setting , then press .
3. Press or to select Tone Setup then press .
4. Press or to select Key Tone , Batt. Tone , or Out Of Range , then press .
5. Press or to select On or Off , then press . You hear confirmation tones.
7.3. Set the Date and Time
Through telephone base:
1. Press
Menu and or to select BS Settings .
2. Press Ok and or to select Date/Time .
3. Press Ok and or to select Date Format .
4. Press Ok and or to select your desired date format ( DD-MM-YY or MM-DD-YY ) or
Press or to select Time Format , then press , select your desired time format ( 24HR or 12HR ).
5. Press Ok to confirm.
Through cordless handset:
1. Press
when idle.
2. Press or to select HS Settings , then press .
3. Press or to select Date/Time , then press .
4. Press or to select Date Format , then press , select your desired date format ( DD-MM-YY or
MM-DD-YY ), OR
5. Press or to select Time Format , then press , select your desired time format ( 24HR or 12HR ).
6. Press to confirm. You hear confirmation tones.
7.4. Talking Digit
You can turn on or off the audible spoken tone that is spoken when you press the dialing key on handset and
Base during predialing during a call.
1. Press Menu when idle.
2. Press or to select Talk Digit , then press Ok to select On or Off .
3. Press Ok to confirm. You hear confirmation tones.
Note: spoken language of talking digit is same as what language has been in selected Section 5.1.2.