20
40
00
32
en
_b
a_
a0
61
System settings
Incoming code
Some PBXs automatically insert the public
access code for an incoming call. With this
type of PBX, “Incoming code” must be
activated for call back from the call register
to function properly:
1.
Select
P m
>
System
settings
>
PBX
>
Functions
>
Incoming
code
.
2.
Press
x
.
Handset:
This function is found on the handset in
the “BaseStat.setting” submenu.
Automatic ECT
➊
You can check whether you need the
function “Autom. ECT” or “Switching with
disconnect”, provided the PBX sup-ports
this feature.
1.
Select
P m
>
System
settings
>
PBX
>
Functions
>
Autom.
ECT
.
2.
Press
x
.
You are in the middle of a call.
1.
Press
r
(inquiry call).
2.
Enter the phone number.
3.
Press
OK
.
4.
<
hang up.
Handset:
4.
Press
b
.
The function is found on the handset in the
“BaseStat.setting” submenu.
If your two call partners are not switched
now, you have to deactivate “Autom. ECT”.
Automatic keypad
If you want to control a PBX by sending
information, for example, you have to
activate “Aut. keypad”.
1.
Select
P m
>
System
settings
>
PBX
>
Functions
>
Autom.
keypad
.
2.
Press
x
.
Handset:
The function is found on the handset in the
“BaseStat.setting” submenu.
➊
Depends on PBX
Summary of Contents for Eurit 595
Page 102: ......
