Swissvoice Eurit 595, User Manual

Page: 56 / 103

20
40
00
32
en
_b
a_
a0
52
Using multiple handsets
Note:
The base station assigns the internal
number for the handset automatically. If
log on was successful, the letter (e.g. A) of
the base station appears in the display.
An error tone sounds and the letter “A”
flashes if the logging-on process failed.
GAP functions are described in the section
“GAP uses”.
Logging a third-party handset
onto the base station (GAP)
To log a third-party handset (“other hand-
set”) onto your base station, the handset
must support GAP (generic access profile).
Prepare the base station with a Eurit 595
handset or base station:
1.
Select P m >
System settings
>
Log on
>
Other handset
.
2. Specify a 4–8 digit access code (AC)
(e.g. 12345).
3. Press
OK
.
4. Specify the other third-party
handset’s new internal subscriber
number (1–6).
5. Press
YES
.
6. Log on the third-party handset
according to its instructions.
Note:
If the internal call number is seized a second
time, the handset first logged onto it is
logged off.
GAP uses
Your telephone supports the multi-vendor
DECT GAP protocol. To be able to log a
handset onto a third-party base station, the
base station must support the GAP proto-
col.
The following are some of the functions
available:
• Outgoing calls from the handset
• Taking incoming calls
• Internal calls from handset to handset
Log a handset off a base station
To log a handset off a base station:
1.
Select P m >
System settings
>
Log off
.
2. Select the handset to be logged off.
3. Press
OK
.
Handset:
1. Select P m >
BaseStat.setting
>
Log off
.
If the log off was successful, it is signalled
in the display.
Note:
To log off a handset, you must be within
range of the base station. You can log off
third-party handsets only with the Eurit
595
ISDN
handset or from the base station
and not using the other handset itself.