Swissvoice Eurit 595, User Manual

Page: 44 / 103

20
40
00
32
en
_b
a_
a0
40
During a call – switching functions
The following pages describe the most
often used switching functions available
with your Eurit 595 base station.
External call waiting
When you are in the middle of an internal
or external call and a call arrives, the
external call is signalled by a call waiting
tone and the following display:
1. You now have the following options:
9 Reject the call and continue the
current call.
OK
Accept the call; the first call is
placed on hold.
P m Take over/end or forward the call.
Note:
If the network does not transmit the tele-
phone number (CLIP), the display shows
“unknown” instead of showing the name
(if the number corresponds to a directory
entry) or the number. A call is only rejected
for good if it has been rejected on all calling
devices (subscribers). This function depends
on the “System settings”, i.e. whether call
waiting is on or off on the corresponding
MSN.
OK
9 P
M
0319982218
Call
Anna
Internal or external inquiry
You are in the middle of an internal or
external call and interrupt it to make an
inquiry of another internal or external call
partner:
1. Press
I
.
The active call partner is placed on
hold.
2. Select internal number 1–6 or base
station (7).
3. Press
OK
.
Or
1.
Press
r
(for external).
2. Enter the external number or select
from the directory.
3. Press
OK
.
The inquiry is initiated (the ringer
sounds). When the call partner
answers, the following appears
(if external):
Note:
See also “Brokering”.
If the second connection (inquiry) is not
successful, press
r
or
I
again to recon-
nect to the first call partner.
Connected to
2: Internal 2
1 : 013180102
P
M
2 ≥1 M