Swissvoice Avena 135, User Manual, Page: 79 / 100

77
20401541en_ba_a0
Base Station settings
Selecting the Flash time
A so-called ‘flash’-signal is sometimes required to perform special network service func-
tions. Ask your service provider for further details on when to use such a flash signal.
Your Avena 135 /135 Duo has a dedicated key to generate this flash signal.
To select the length of the flash signal, follow the procedure below:
Open the menu by pressing the “Menu” softkey.
Select the menu entry and press the “OK” softkey.
Select the menu entry and press the “OK” softkey.
The current setting is indicated by a tick mark. Select the desired flash time
with the navigation keys, e.g.
.
Select one of the following values (in msec):
• 80, 100, 120, 180, 250, 300 or 600 msec
Confirm with the “OK” softkey. The new flash time is set.
Press the cancel key for approx. 2 seconds to return to the standby mode.
Note The flash time setting is stored in the base station. This means that each
change of the flash time is immediately available to all other handsets which
are logged on to the same base station.
Flash 100 ms
Flash time
Settings
OK
OK
Menu
…
OK