manualshive.com logo in svg

Swissvoice Avena 135, User Manual, Page: 35 / 100

Share
Download
Swissvoice Avena 135 User Manual Download Page 35

33

20401541en_ba_a0

Comfort dialling

Deleting the entire redial list

Press the “Redial” softkey. The first entry in the redial list is displayed.

Scroll to the desired entry using the navigation keys.

Open the redial list administration menu by pressing the “Options” softkey.

Select the menu entry 

and press the “OK” softkey.

The display reads 

. Press the “Yes” softkey to 

confirm. 
The display briefly shows 

and the entire list is deleted.

Press the cancel key for approx. 2 seconds to return to the standby mode.

Note

The entire redial list is also deleted when the handset is reset!

Store number from the redial list in the phonebook

Press the “Redial” softkey. The first entry in the redial list is displayed.

Scroll to the desired entry using the navigation keys.

Open the redial list administration menu by pressing the “Options” softkey.

Select the menu entry 

and press the “OK” softkey.

The display reads 

. Enter the corresponding name

and finish by pressing the “Store” softkey. The display briefly shows

. The entry is now stored in the phonebook.

Press the cancel key for approx. 2 seconds to return to the standby mode.

Entry stored !

Enter name :

Store phonebook

List deleted !

Delete list ?

Delete list

Opt

Yes

OK

…

Opt

OK

…

Store

Z

Summary of Contents for Avena 135





































































































Reviews:

No comments