Swissvoice Avena 135 User Manual Download Page 64 | Manualshive

Page: 64 / 100

Swissvoice Avena 135 User Manual Download Page 64

62

20401541en_ba_a0

List of outgoing SMS messages

The list of outgoing SMS messages contains:
• SMS messages which you have explicitly stored
• SMS messages which could not be send (transmission failure)

SMS message which were send are deleted after successful transmission, unless you
have explicitly stored that message. Remember that the SMS storage capacity of your
Avena 135 /135 Duo is limited to a total of 15 SMS messages.

Viewing entries from the list of outgoing SMS messages

Open the menu by pressing the “Menu” softkey.

Select the menu entry

and press the “OK” softkey.

Select the menu entry

and press the “OK” softkey.

Select the menu entry

and press the “OK” softkey.

The first SMS message in the list is displayed, e.g.:

The list is sorted by date/time of transmission (most recent message first).

Browse through the SMS messages using the navigation keys.

By pressing the “Read” softkey the text contents of the selected SMS message
will be displayed.

Use the navigation keys to scroll through multiple lines of text within the
SMS message.

Press the cancel key briefly to return to the list of outgoing SMS messages.

23.06

09:17

077395578223

Send SMS

01/12

Outgoing SMS

SMS

Messages

SMS Messages

OK

OK

OK

Menu

Read

«
...
62
63
64
65
66
...
»

Summary of Contents for Avena 135





































































































Reviews:

No comments