66
20405527en_ba_a0
Telephoning
Call transfer to another handset
You can transfer the call you are conducting to another handset (= switching).
1. Press
INT
and dial the handset to which you wish to transfer the call. The external
caller is put on hold.
2. If the second handset answers, you can talk to the internal call partner without the
external caller hearing you. Press
to transfer the call.
Note
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing
.
External enquiry call
You are conducting an external call and want to call another external party without
ending the active external call.
1. Start the external enquiry call by pressing the enquiry key
.
2. Enter the external call number and press
OK
.
To switch between the call partners press the softkey
BROK
.
To connect all three call partners with each other in a 3-party conference, press the
softkey
CONF
.
Note
An external enquiry call is managed by the public telephone network and is
therefore dependent on your network operator’s available services (network
functions). Contact your network operator to find out whether this service
is supported.