55
20405527en_ba_a0
Aeris 246 base station
Aeris 246
Group call on handsets (paging)
Getting to know your telephone
Once the new batteries have been inserted, the display on the handset indicates the
actual charging status only after a complete charging cycle.
Note
You can replace the handset in the base station after every call. Charging is
electronically controlled to ensure optimal charging of batteries in different
charge states. Avoid removing the batteries from the handset for no good
reason, since this affects the optimum charging cycle.
Because your telephone is fitted with a low-radiation mechanism, the antenna
automatically switches off in standby mode and cannot therefore emit any
radiation. Your telephone is delivered with this function switched on.
You can telephone for up to 12 hours with fully charged batteries.
The handset has a standby time of up to 120 hours.
If the battery charge status has reached its lower limit, the battery symbol
flashes in the display and a warning signal is heard. You have 10 minutes of
talk time left.