65
20405527en_ba_a0
Telephoning
Note
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing the softkey under
END
.
• Internal enquiries are managed by the base station and are not dependent
on your network operator’s available services.
Brokering and Conference
You have two active calls (1 internal and 1 external), one of which is on hold.
1. Press the softkey under
BROK
to switch between the call partners. Press the softkey
under
CONF
to connect all three call partners with each other.
2. Press the softkey under
END
to end the conference and return to brokering.
3. Press
to end one of the calls. The remaining call partners are automatically
connected with each other.
Note
Brokering between two external call partners is managed by the public
telephone network and is therefore dependent on your network operator’s
available services (network functions).