manualshive.com logo in svg

Swisscom Top A312, User Manual, Page: 51 / 84

Share
Download
Swisscom Top A312 User Manual Download Page 51

20400025en_ba_a0

47

BaseStat. setting

Base station PIN

BaseStat. setting

Call allocat.

Base station settings

1.

Select "Base station PIN".

2.

Press 

OK

.

3.

Enter 4-digit PIN.

4.

Press 

OK

.

5.

Repeat 4-digit PIN.

The base station PIN is activated.

Note:

Please  remember  your  base  station  PIN,
otherwise the services of your dealer will
be required at your expense.

Call allocation

An incoming external call arrives at the base
station. The external call is only switched
to those handsets where call allocation is
on. The other handsets can only be reached
internally. By default, call allocation is on.

1.

Select "Call allocation".

2.

Press 

OK

.

3.

Enter system PIN if necessary.

4.

Select handset 1–6.

5.

Press 

x

.

Call allocation for this handset is on
or off.

Base station PIN

The  base  station  PIN  (personal  identifica-
tion number)is required if you want to pro-
tect individual user options from unauthor-
ised access (e.g. logging off handset etc.).
By 

default

, base station PIN is off ("0000"):

Summary of Contents for Top A312





















































































Reviews:

No comments