Swisscom Top A312 Page 48 User Manual Download

Page: 48 / 84

20400025en_ba_a0

Handset settings

Handset ringer

Volume

Melody

Internal melody

Name dialling

Increasing

Volume

≤

≥

Handset settings

Handset ringer

You can select the volume and the melody.

E.g. select "Volume".

Press

≤

≥

Select your settings.

The selected setting is played back
continuously for you to check.

Press

The settings are saved.

Note:

Please note that full volume may damage
your hearing.

Increasing

You can set the volume to "Increasing",
i.e. the ringer starts at the lowest volume
level, increasing to the set level:

Select "Increasing".

Press

Note:

Please note that full volume may damage
your hearing.

If the volume is set to 3 or higher an the
function "Increasing" is disactivated, the
fist and second ring starts at level 3 and up
from the third ring with the set volume.

Summary of Contents for Top A312





















































































Search results

Summary of Contents for Top A312

Reviews:

Related manuals for Top A312

Brands by name

Popular brands

Swisscom Top A312, User Manual

Search results

Summary of Contents for Top A312

Reviews:

Related manuals for Top A312

Brands by name

Popular brands