Swisscom Top A312, User Manual

Page: 41 / 84

20400025en_ba_a0
37
BaseStat. setting
Log on
On other system
BaseStat. setting
Log on
Other handset
Using several handsets
Logging a handset onto another
base station (GAP)
To log your handset onto a third-party base
station (other base station), the handset
must support the GAP generic access pro-
file.
Follow the manufacturer’s instructions
when preparing the other base station for
log on.
Prepare the handset:
1. Enter the 4-8 digit access code (AC)
of the previously prepared base
station (e.g. 12345).
2. Key in the designation of the base
station (A–D).
3. Press
YES
.
4. Log the other handset on according
to its instructions.
Note:
The base station assigns the internal
number for the handset automatically.
The base station letter (e.g. A) appears in
the display to confirm that log on was suc-
cessful.
If log on was unsuccessful, an error tone
sounds and the letter A flashes.
GAP functions are described in the section
"GAP uses".
Logging another handset onto
the base station (GAP)
A third-party handset (other handset) must
support the GAP generic access profile in
order to be logged onto your base station.
Prepare the base station using the handset:
1. Specify a 4 to 8 digit access code
(AC), (e.g. 12345).
2. Key in the new internal number
(1–6) of the other handset.
3. Press
YES
.
4. Log the other handset on according
to its instructions.
Note:
If the internal number used has previously
been allocated for logging on, the hand-
set first logged on will be logged off.