Swisscom Handset Top S329, User Manual

Page: 19 / 30

17
Handset settings
Top S329 / SWZ_PTT Swisscom EN / A31008-M1751 / start_guide_time.fm / 29.07.2005
u
Acknowledge tones :
– Confirmation tone (rising tone
sequence): at the end of the entry/
setting and when an SMS or a new
entry arrives in the calls list
– Error beep (descending tone
sequence): when you make an
incorrect entry
– Menu end tone : when scrolling at
the end of a menu
u Battery low beep : the battery pack
requires charging.
v
¢
Ð
¢
Audio Settings
¢
Advisory Tones
¤
Change multiple line input:
Key Tones:
Select On or Off .
Confirm.:
Select On or Off .
Battery:
Select On , Off or In Call . The battery
tone is activated/deactivated or only
sounds during a call.
¤
Save changes (page 21).
You cannot deactivate the confirmation
tone for placing the handset in the charg-
ing cradle.
Setting the alarm clock
Requirement: the date and time have
already been set (page 7).
Activating/deactivating the alarm
clock and setting the wake-up time
v
¢
ì
¤
Change multiple line input:
Alarm Clock:
Select
On
or
Off
.
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¤
Save changes (page 21).
You will see the
¼
icon.
A wake-up call with the selected ringer
melody is signalled on the handset. The
wake up call sounds for 60 seconds. The
display shows
Alarm Clock
. If no key is
pressed the wake-up call is repeated twice
at five minute intervals and then switched
off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (slumber
mode)
Requirement : A wake-up call is sounding.
§Off §
Press the display key. The
wake-up call is deactivated.
or
§Snooze§
Press the display key or any
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Restoring the handset default
settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call
list or calls list, nor the handset's registra-
tion to the base station.
v
¢
Ð
¢
Handset
¢
Reset Handset
§Yes§
Press the display key.
a
Press and hold (idle status).
Cancel the restoring process by pressing
a
or the display key
§No§
.