54
Connecting the base to the PABX
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / pabx.fm / 25.05.2010
V
e
rsion 4, 16.0
9
.2005
Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Dialling mode and Flash
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Pulse dialling (PD).
§Menu§
Open main menu.
*#Q5#
Press keys.
~
§OK§
Pulse dialling mode (DP).
Or:
~ Q
§OK§
Tone dialling (DTMF).
Setting recall
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
§Menu§
Open main menu.
*#Q5#
2
Press keys.
~
Enter digits for the recall time
and press
§OK§
.
0
= 80 ms;
1
= 100 ms;
2
= 120 ms;
3
= 400 ms;
4
= 250 ms;
5
= 300 ms;
6
= 600 ms;
7
= 800 ms
Setting pauses
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key
c
and sending the number.
§Menu§
Open main menu.
*#Q5#
O
Press keys.
~
Enter number for the length of
the pause (
1
= 1 sec.;
2
= 3 secs.;
3
= 7 secs.) and press
§OK§
.
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
§Menu§
Open main menu.
*#Q5#
4
Press keys.
~
Enter a digit for the length of the
pause (
1
= 800 ms;
2
= 1600 ms;
3
= 3200 ms) and press
§OK§
.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite:
You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is automat-
ically reactivated.
Please note
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is only used for a few old
PABXs.
