27
Making calls
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / telefony.fm / 17.06.2010
V
e
rsion 4, 16.0
9
.2005
Making calls
When the display backlight is switched off
(
page 49), pressing any key will activate
the backlight. The relevant key function is
performed.
Making an external call
External calls are calls using the public tele-
phone network.
~ c
Enter the number and press the
talk key.
Or:
c ~
Press and
hold
the talk key
c
and then enter the number.
You can cancel the dialling operation with
the end call key
a
.
You are shown the duration of the call while
the call is in progress.
Ending a call
a
Press the end call key.
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key
c
.
To accept the call, press the talk key
c
.
Aton CLT112: Instead of accepting the call,
you can also redirect it to the answering
machine:
§Menu§
¤
Divert to AM
¤
§OK§
If the handset is in the charger and the
Auto
Answer
function is activated (
the handset automatically answers calls
when you remove it from the base/charger.
If the ringer is intrusive, you can deactivate
it:
§Menu§
¤
Silent
¤
§OK§
You can accept the call as long as it is dis-
played on the screen.
Using Calling Line
Identification
When you receive a call, the caller's number
and/or name is displayed on the screen, if
the following prerequisites are met.
u
Your network provider supports CLIP, CLI
and CNIP.
– CLI (Calling Line Identification):
The caller's number is transmitted.
– CLIP (Calling Line Identification
Presentation): The caller's number
is displayed.
u
You have requested CLIP or CNIP from
your network provider.
*
Please note
Dialling with the directory (
call list (
page 33) and redial list
(
page 32) saves you from repeatedly
keying in phone numbers.
*
In the Swisscom ISDN network, CLIP is trans-
mitted automatically, CNIP does not work.
