52
Base station settings
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / registr_sett.fm / 17.06.2010
V
e
rsion 4, 16.0
9
.2005
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are
not
affected by a
reset:
u
Registration of the handset to the base
u
Date & time
u
Entries in the directory, call lists, SMS lists
§Menu§
¤
Settings
¤
System
¤
Reset Handset
§OK§
Confirm prompt.
Base station settings
The base settings are carried out using a reg-
istered handset.
Changing ringtones
u
Volume:
You can choose between five volumes
and the "crescendo" ring (
Select "0" to deactivate the base ringer.
u
Ringtones:
You can set a ringer melody for external
calls (
u
Time control:
You can specify when the base should
not ring (e.g., during the night).
§Menu§
¤
Settings
¤
Audio Settings
¤
Ringtones (Base)
¤
Ringer Volume
/
Ringer Melody
/
Time Control
For more information on adjusting the set-
tings, see page 50.
Activating/deactivating
music on hold
§Menu§
¤
Settings
¤
Telephony
¤
Music on hold
Press
§OK§
to activate or deactivate music on
hold (
³
= on).
Activating repeater support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite:
A repeater is registered.
§Menu§
¤
Settings
¤
System
¤
Repeater Mode
Press
§OK§
to activate/deactivate repeater
mode (
³
= activated).
After activating or deactivating the
repeater, switch your handset off and
on again (
Please note
u
Eco Mode
/ Eco Mode+
and repeater support cancel each
other out, i.e., you cannot use Eco
Mode and
Eco Mode+
when using a
repeater.
u
The default encrypted transmission
setting is deactivated when a
repeater is activated.
