Aton CL108 / Swisscom EN / A31008-M2005-F151-1-2X19 / starting.fm / 23.07.2008
3
First steps
Check the pack contents
◆
One Aton CL108 base station,
◆
one mains adapter,
◆
one handset,
◆
one phone cord,
◆
two batteries,
◆
one battery cover,
◆
one user guide (German, French, Italian),
◆
Environmental leaflet (Swisscom).
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a
temperature range of +5 °C to +45 °C.
¤
Set up the base station at a central location on a flat, non-slip surface in your house or
apartment.
The phone's feet do not usually leave any marks on surfaces. However, due to the multi-
tude of different varnishes and polishes used on today's furnishings, the occurrence of
marks on the surfaces cannot be completely ruled out.
Please note:
◆
Never expose the telephone to the influence of heat sources, direct sunlight or other
electrical devices.
◆
Protect your telephone from moisture, dust, corrosive liquids and vapours.
Connecting the base station
¤
First
connect the mains adapter
1
.
¤
Then
connect the telephone jack
2
and insert the cables into the cable
ducts.
Please note:
◆
The mains adapter must
always be
connected
, as the phone will not oper-
ate without mains connection.
◆
Only use the mains adapter and phone
cord
supplied
. Pin connections on tele-
phone cables can vary.
Please note
Pay attention to the range of the base station.
This is up to 250 m in unobstructed outdoor areas and up to 40 m inside buildings.
The range is reduced when Eco Mode is activated (
1
1
1
2
