Swing-N-Slide Tunnel Twister, Assembly Instructions Manual, Page: 6 / 24

loc nut
washer
washer
1" bolt
C. Slide Support and Entry
1.
Align the mounting panel to the previously
assembled entrance section
(Fig. 3) . Attach the
mounting panel to the entrance section at the hole
locations indicated in
(Fig. 3a)
using one 1" bolt,
two washers and one loc nut per hole as indicated
in
(Fig. 3b) .
NOTE: Hand tighten the loc nuts only.
Fig. 3b
Fig. 3a
Tunnel Twister Assembly Instructions
Fig. 3
6