12
Assembly Instructions
Mounting SlidE
1.
The help of at least one other individual
will be required for mounting the slide.
2.
Insert the 2-3/4" bolts through a washer,
through previously drilled 3/8" holes in the
upper rail of the unit (see Fig. 11).
3.
Carefully lift the slide assembly to the
opening of the unit. Place the mounting
panel/slide assembly on the 2-3/4" bolts
previously inserted (see Fig. 11). Place
washers and loc nuts on the bolts and
hand tighten.
4.
Adjust the mounting panel/slide assembly
until the holes of the mounting panel align
with the previously drilled pilot holes.
5.
Attach the top corners of the mounting
panel/slide assembly first using a 2-1/2"
lag bolt and washer . Secure the
remainder of the panel/slide assembly to
the unit using 1-1/2" lag bolts and
washers at each open hole location (8 are
required).
6.
Tighten the 2-3/4" bolts securely.
7.
Attach the bottom corners of the mounting
panel/slide assembly using a 2-1/2" lag
bolt and washer.
SlidE baSE
1.
Remove approximately 3" of grade
directly beneath the base of the slide.
Fig. 11
Fig. 12
2-3/4" bolt
washer
washer
washer
washer
washer
loc nut
loc nut
2-3/4" bolt
2-1/2" lag bolt
1-1/2" lag bolt
3"
