Swecoin TTP 5000, Service Manual

Page: 23 / 60

Edition B, May 97 TTP 5000 Series Kiosk Printer Sub-system — Service Manual 21
3.2.11 Presenter module
REMOVAL
1. Separate the upper and lower chassis modules. See Section 3.2.2 page 16.
2. Disconnect all cables from the control board.
3. With the upper chassis module standing on its front, remove the three lower screws.
Figure 8. Preparations for removing the presenter module
4. Open the cable clip at the back of the printer front. See figure below.
5. Put the upper chassis module back to normal position and remove the two upper
screws at the front of the upper chassis module.
Figure 9. Loosening the presenter module
6. Remove the presenter module.