Swecoin TTP 101, Service Manual

Page: 38 / 56

TTP 101 Kiosk Printer Sub-system – Service Manual 0102 38
Item Code Ordering
number Designation Qty Note
– SP 01192-000 Cutter drive module assy. 1
1 – 09100-226 - MRX-H M3x12 1
2 SP 00630-000 - Spacer 1
3 – 01173-000 - Cutter actuator arm 1
4 – 09100-222 - Screw MRX-H M3x8 2
5 SP 00628-000 - Cutter arm support 1
6 – 09022-310 - Nut M6M M3 1
7 – 00626-001 - Cutter base plate assy. 1
8 SP 01174-000 - Cam wheel 1
9 – 09010-202 - Self threading screw B2x9.5 1
10 – 01156-000 - Cutter motor assy. 1
11 SP 00631-000 - DC motor with gearbox 1
12 SP 00372-000 - Microswitch 1
13 – 01163-000 - Micro switch arm, straight 1
14 – 01162-000 - Cable assy. 1
NOTE! – On printers older than mod 5 (printers with metallic presenter mechanism) the
complete cutter drive module assy. must be replaced if the cutter drive is in need of repair.