With a USB-C cable connected from a
host device (laptop) to the Eval Kit
USB-C Port, users can communicate
directly with the Swarm Modem while
charging the Eval Kit batteries.
To enable this, power off the Eval Kit,
and move the
SERIAL CTRL Jumper J7
(#2)
to the right position, from
FEATHER to USB (see bottom image).
Power on the Eval Kit once again -
note that the Feather will not be
accessible in this mode, and the
OLED display will not be active.
Using a Serial Monitor tool (such
as
), connect to the Swarm
Modem using the identified USB/
COM port, baud rate 115200,
config 8-N-1, with Flow Control
None.
You can now send commands and
receive responses to/from the
Swarm Modem. See the
for
more details.
USB-C Connection
Message Transmission
SOMETHING BROKEN OR MISSING?
CONTACT SWARM CUSTOMER SUPPORT:
TECHSUPPORT
@
SWARM.SPACE
SWARM EVALUATION KIT QUICKSTART GUIDE
14
© 2022 SWARM TECHNOLOGIES
