Command
Functionality
Example
@set mode <ap, sta>
Set Eval Kit wifi mode to access point
or station mode.
Default: ap
@set mode sta
@set wifi <enabled,
disabled>
Enable or disable wifi functionality and
neopixels. It will change the mode and
then immediately reset the feather.
Default: enabled
@set wifi disabled
@set ssid \<ssid\>
Set the ssid to create when in ap mode,
or to connect to in station mode.
Default: swarm-xxxx (from MAC address)
@set ssid EvalKitAP
@set ssid MyHomeWifi
@set pw \<password\>
Set the password to create when in AP
mode, or to connect to in STA mode.
Default: 12345678
@set pw EvalKitPW
@set pw MyHomePW
@set interval \<minutes\>
Set the interval for the gps pinger feature.
0 will disable the GPS pinger. Acceptable
range is 15 to 720 minutes.
Default: 60min
@set interval 120
@show
Print the wifi mode, ssid, password, and
interval to be committed.
@show
@show <battery, 3v3, solar>
Print the battery, 3v3, and solar voltage
and current.
@show solar
@reset
Restart the feather (commits changes).
@reset
@factory
Reset the NVM to its default state and
restart the feather.
You must @reset for changes to take
effect.
@factory
SOMETHING BROKEN OR MISSING?
CONTACT SWARM CUSTOMER SUPPORT:
TECHSUPPORT
@
SWARM.SPACE
Kit Interactivity -
FeatherS2 Commands
SWARM EVALUATION KIT QUICKSTART GUIDE
PAGE
1
7
© 2022 SWARM TECHNOLOGIES