SWARCO CAIMAN-PRO B32, User Manual, Page: 32 / 85

www.swarco.com
SWARCO TRAFFIC SYSTEMS GMBH, Niederkircher Straße 16, D-54294 Trier, Germany
T. +49-651-21002-0, +49-651-21002-999, E. detection@swarco.de
32/85
6.1.2 Simulation Mode 4: Trigger Output Simulation
This mode, aka “relay simulation”, is only available with the statistic and event trigger module
of the CAIMAN-PRO sensor.
Simulation Mode 4 generates triggered outputs (i.e. digital binary signals) to test the reception
in the Intersection controller, PLC or other connected host.
The Tigger Output Simulation has two sub modes:
1) Set individual Triggers
2)
Automated scheme in a “knight-rider” style (i.e. trigger running from 1 to 32 and from
32 back to 1).
Table 6-3: Trigger Simulation parameters
Name Description Par. No Action
UAT V4
Type Typical values
Relay Simulation
(Simulation Mode 4)
Trigger Output
simulation 440 2000 Int 0: simulation off
1: submode 1
(individual trigger setting)
2: submode 2
(running trigger, knight-rider)
active_relays_part1 defines active relays
(bit-coded) for relay
simulation 1
(relay1…32) 441 2000 Int Default: 1
active_relays_part2 defines active relays
(bit-coded) for relay
simulation 1
(relay33…64) 442 2000 Int Default: 0
Number of
simulated Relays Defines number of
simulated relays for
relay simulation 2 443 2000 Int Default: 8
Figure 26:
Command example to enable “knight-rider” Trigger Output Simulation