swaploader SL-160, Parts And Operation Manual

Page: 30 / 94

Section II: Installation - Accessories
2.1.INS.ACC.52H11
MATERIAL LIST FOR 52H11
ITEM PART # QTY DESCRIPTION WT-lb/ea.
1 52H12 1 Rear Bumper Weldment 95.66
2 63H94 2 Vertical Channel 9.58
Figure C
Figure B
NOTE:
1. PRIOR TO ANY WELDING, CONSULT THE TRUCK MANUFACTURE FOR ANY SPECIAL PRECAUTIONS THAT MAY
NEED TO BE TAKEN. TYPICALLY THE BATTERIES MUST BE DISCONNECTED AND THE GROUND LEAD FROM
THE WELDER SHOULD BE AS CLOSE TO THE PART BEING WELDED TO AVOID THE POSSIBILITY OF ARCING
ACROSS BEARINGS, GEARS, ETC.
2. ALL WELDS SHOULD BE DONE UTILIZING A LOW HYDROGEN WELDING PROCESS.
BUMPER LOCATION CHART
DIM. A
DIMENSION B (MAX)
SL-105 SL-145
SL-160 SL-212
SL-214 SL-220
SL-222
SL-240 SL-2418 SL-330
SL-400 SL-412 SL-406
SL-518
SL-520 SL-650
24 5/8”
13 1/2" 15 3/4" 15 1/4"
17”
14 1/4"
14”
13 1/2"
16 1/2” 18”
22 5/8”
12 1/4" 14 1/2"
14”
15 3/4"
13”
12 3/4"
12” 15”
20 5/8” 11” 13”
12 3/4" 14 1/4" 11 3/4"
18
5/8”
9 3/4" 11 3/4" 11 1/2"
2- 18