swaploader SL-160 Parts And Operation Manual Download Page 18

Page: 18 / 94

Section II: Installation

2.0.INS.SL-160

CABLE CONTROL INSTALLATION w/ U-LOCK (OPTION)

The Universal Body Lock (U-Lock) can be installed with a standard 3-section valve and
operated from the cab (see

Pg. 6-10

for routing). A separate indicator light and harness will be

provided to be installed in the truck cab. This will notify the operator when the U-Lock has been
engaged or disengaged.

Review all directions and diagrams provided before starting installation.

Mount valve to the hoist’s Main Frame and attach all hoses, hose clamp
assemblies and fittings as shown on

Pg. 6-10.

Mount Indicator Light Box in the truck cab where it will
be clearly visible to the operator.

Route Indicator Light and Harness (

Pt. No.

40P60

) from the truck cab to the U-Lock

cylinder.

Hardwire or plug in provided 12V
adapter for indicator
light.

2-6

Summary of Contents for SL-160































































































Search results

Summary of Contents for SL-160

Reviews:

Related manuals for SL-160

Brands by name

Popular brands

swaploader SL-160, Parts And Operation Manual

Search results

Summary of Contents for SL-160

Reviews:

Related manuals for SL-160

Brands by name

Popular brands