troubleshooting
Problems
Possible Causes
Solution
Iron won't heat.
Incorrect connection to
the mains socket.
Temperature setting is at
NYLON position.
Defects with internal circuit
causing unit to enter self
protect mode.
No water in water tank.
Filter has not been properly
installed into water tank.
Water tank has not been
properly installed.
Re-plug the unit to mains
socket.
Lay down handle.
Select the required ironing
temperature according to
Fabric Setting Chart.
Take to a qualified service-
man or manufacturer or its
service agent for
examination and repair.
Select the required ironing
temperature according to
fabric setting chart.
Re-power the unit again.
If it still can not resume,
please take it to its service
agent or similarly qualified
persons for repair.
Fill water into water tank.
Install filter into water tank.
Slide water tank into the
power base until a “click”
sound is produced and it
will be locked into place.
Handle has not been laid
down.
Temp setting is at " "
position.
Unknown malfunctions.
No steam
comes out
when pressing
steam switch after
the desired
temperature
is reached.
“ ” blinks quickly,
other fabric
indicators turn off,
buzzer sound a
“Bi”. No buttons
work. It will resume
when re-powered
again.
18
