The unique design for cord storage of base unit provides not only beautiful features
but also easy storage.
1. After use, unplug the unit from the mains socket. Pour out the remaining water
from the water tank after the unit has completely cooled down.
2. Rest iron on power base, fold connecting supply in half and wind the connecting
supply counter-clockwise around cord slot of the base unit. Next tie the power
cord and connecting supply with cord tie.
Wind the remaining power cord
clockwise around the cord slot, then put plug between connecting supplies
in order to tighten fully.
3. Store the appliance well for further use.
cord storage (optional)
16
Method:
1. Slide water tank out from base unit, take the filter out from the water tank,
and then replace with a new one.
2. After new filter has been installed into water tank, fill water into water tank
to MAX fill level, and then slide water tank back into base unit.
(Immerse filter in water for several minutes in order to gain better performance
in future use).
replacement of Filter
