Swann SI9020TTN Instruction Manual Download Page 5

uK plug Wiring instructions

14.  Never use the iron facing towards people because the steam can cause burns. 

15.  Never twist the supply hose during use. 

16.  The iron must not be left unattended while it is connected to the mains supply. 

17.  The iron must be used and rested on a stable surface.

18.  When placing the iron on its stand, ensure that the surface on which the stand  
 

is placed is stable. 

19.  The iron is not to be used if it has been dropped, if there are visible signs  
 

of damage or if it is leaking. 

20.  If the supply cord is damaged, it must be replaced by the manufacturer, its service  
 

agent or similarly qualified persons in order to avoid a hazard.

21.  The appliance is not intended for use by children or other persons without  
 

assistance or supervision if their physical, sensory or mental capabilities prevent  

 

them from using it safely. Children should be supervised to ensure that they  

 

do not play with the appliance. 

22.  The appliance could produce a noise level of < 70 dB during operation when no  
 

water is in the water tank.

05

WWW.sWan-BranD.co.uK

The wires in the mains lead are coloured in accordance with the following code:

 

BLUE 

NEUTRAL

 

BROWN 

LIVE

 

GREEN/YELLOW   EARTH

As the colours of the wire in the mains lead of this appliance may not correspond 
with the colour markings identifying the terminals on your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked 
with the letter N or coloured black. The wire which is coloured BROWN must be 
connected to the terminal which is marked with the letter L or coloured red.  
The wire which is coloured GREEN/YELLOW must be connected to the terminal 
which is marked with the letter E or (earth symbol) and is coloured GREEN  
or GREEN/YELLOW.

WARNING:  THIS APPLIANCE MUST BE EARTHED

Summary of Contents for SI9020TTN





















Reviews: