Video Loss Time
Sequence Dwell Time
With sequence dwell time activated you can set the time the display shows each channel when the channels are viewed
in individual mode.
1.Select SEQ. DWELL TIME in the MISCELLANEOUS SETUP screen.
2. Push SELECT to choose between 1, 5, 10, 15, 30, 60 seconds and OFF.
3. To activate the sequence function push the PAUSE button when you are in display mode.
4. Push PAUSE again to deactivate the sequence.
This function allows you to set a buzzer sound if one of the cameras connected were to be unplugged or if the DVR
could no longer detect that camera. The buzzer will beep three times.
1.Select VIDEO LOSS TIME in the MISCELLANEOUS SETUP screen.
2. Push SELECT to turn ON and OFF.
Keypad Tones
The beeper sound you hear each time you push a button can be
disabled.
1. In the Main menu select MISCELLANEOUS SETUP and then
KEYPAD TONES.
2. Push the SELECT button to turn ON or OFF.
The DVR allows audio to be recorded on one of the channels. If your cameras do not support audio a seperate micro-
phone can be connected for this.
1. In the Main menu select MISCELLANEOUS SETUP and then
AUDIO PORT SETUP.
2. Select AUDIO PORT 1 - VIDEO CHANNEL and push the SE-
LECT button to select which channel the audio will be recorded
from.
3. The next option allows you to activate the recording. Push the
select button to turn the audio recording ON and OFF.
Audio Port Setup
Miscellaneous Setup
