Record Setup allows you to choose which cameras will be recording when the record button is pushed.
Make sure all cameras are set to ON in the Camera Setup screen to enable Record.
1. Use the UP, DOWN, LEFT and RIGHT buttons (on the remote)
or the UP, DOWN, RWD (for left) & FWD (for right) buttons to
select the camera you would like to change settings on.
2. Push the SELECT button to change the setting to ON or OFF.
3. To exit the Record Setup screen push the MENU button.
Record Framerate allows you to set each cameras desired framerate.
The maximum no of frames is 50FPS (PAL systems) and 60FPS (NTSC systems) shared between 4 cameras.
1. Use the UP, DOWN, LEFT and RIGHT buttons (on the
remote) or the UP, DOWN, RWD (for left) & FWD (for right)
buttons to select the camera you would like to change set-
tings on.
2. Push the SELECT button to increase the number of FRAMES
PER SECOND and the STOP button to decrease the number
of FPS.
3. To exit the Record Setup screen push the MENU button.
Record Setup
Record Framerate
Camera Setup allows you to choose which channels will be active when the cameras are plugged into the DVR.
When a camera is set to OFF in Camera Setup you will not be able to view the display for that camera. You will also not
be able to record unless the camera is set to ON in Camera Setup.
1. Use the UP, DOWN, LEFT and RIGHT buttons (on the remote)
or the UP, DOWN, RWD (for left) & FWD (for right) buttons to
select the camera you would like to change settings on.
2. Push the SELECT button to change the setting to ON or OFF.
3. To exit the Camera Setup screen push the MENU button.
Camera Setup
