AMI Solicon4
Instrument Setup
A-96.250.321 / 191015
35
4.
Instrument Setup
4.1.
Establish Sample Flow
1
Open sample flow tap.
2
Wait until the flow cell is completely filled.
3
Switch on power.
4.2.
Programming
Programming
The sensor characteristics are printed on the label of the sensor.
Program all sensor parameters in Menu 5.1.1.1,
<Installation> <Sensors> <Sensor parameters>:
Enter the:
Cell constant [cm
-1
]
Temperature correction [°C]
Cable length
Note:
Cable length [m] Set the cable length to 0.0 m if the
sensors are installed in the flow cell on the AMI monitor.
Program all parameters for external devices (interface, recorders,
etc.). Program all parameters for instrument operation (limits,
, for explanations, see
gram List and Explanations, S. 53
SW-xx-xx-xx
ZK = 0.0417
Cell constant
SWAN AG
Temperature correction
