A-96.250.491 / 190121
AMI Deltacon DG
Program List and Explanations
78
5.4.4
Password:
Select a password different from 0000 to prevent unau
-
thorized access to the menus “Messages”, “Maintenance”, “Opera
-
tion” and “Installation”.
Each menu may be protected by a
different
password.
If you forgot the passwords, contact the closest SWAN representa
-
tive.
5.4.5
Sample ID:
Identify the process value with any meaning full text,
such as KKS number.
5.4.6
Line Break Detection:
If activated, error message E028 is shown in
case of line break on signal outputs 1 and 2.
5.5 Interface
Select one of the following communication protocols. Depending on
your selection, different parameters must be defined.
5.5.1
Protocol:
Profibus
5.5.20
Device address:
Range: 0–126
5.5.30
ID-Nr.:
Range: Analyzer; Manufacturer; Multivariable
5.5.40
Local operation:
Range: Enabled, Disabled
5.5.1
Protocol:
Modbus RTU
5.5.21
Device address:
Range: 0–126
5.5.31
Baud Rate:
Range: 1 200–115 200 Baud
5.5.41
Parity:
Range: none, even, odd
5.5.1
Protocol:
USB-Stick:
Only visible if an USB interface is installed. No further settings are
possible.
5.5.1
Protocol:
HART
Device address:
Range: 0–63
